|
SKY IPMate T-20 USER MANUL
IPMate T-20 can change a normal telephone into a PC
peripheral equipment to make
Internet phone call.At the same time ,IPMate can
connect with PSTN. Thus,customer can
make or receive VoIP or PSTN calls,which keeps
customer`s present fixed line and save
lots of money.
It is smart in size, fashionable in style, and plug
and play, so is the best partner of the
network voice communication software.
Functions：
●
Support Skype and Skypeout：free
unlimited worldwide phone calls to other Skype
users ,and allows to call any phone or mobile phone
all over the world by the Skypeout at
the local phone fee+Skypeout fee
●
Phone rings for all incoming VoIP and PSTN calls;
VoIP or PSTN calls selected by
phone key (*)
●
Auto-detection and auto-switch to VoIP or PSTN calls
●
Allows to forward the Skype phone call into PSTN or
mobile phone.IPMate
T-20
will
automatically forward Skype phone call to the phone
number which is setup in advance.
●
Extremely Easy to Use：with
IPMate there is no difficult configuration of
hardware or
software.
2
Specifications:
l
RJ-11 port : 2
l
USB port : 1
l
Indication Light : 3 (
WORK,
RCV,
DIAL
)
l
Dimensions : 88mm（L）×50
mm（W）×25
mm（H）
l
Working Temperature : 0～60
℃
l
Working Voltage : 5V
l
Power consumption: 0.5W（standby），2W（work）
l
Operating System : suitable for Windows9x／Me／2000／XP／NT
l
PC host : CPU should be at least 300MHz or above
with USB
interface, 10MB above Hard disk spare volume,
network connections（dialup／
broadband／wireless）
About Indication Light:
■
WORK:
it is steadily when standby;it is flashing in use
and when flowing from
the Internet
■
RCV:
it is when incoming call ;it is off when standby
■
DIAL:
it is when dialing out or incoming call;it is off
when standby
Install the driver：
1、Visit
www.skype.com/download
to download the lastest Skype voice communication
software for your OS(Operation System),showed as:
then run the downloaded software in your PC or
NOTEBOOK.
2、Run
the CD in the package ,and click the right sign to
install driver for IPMate T-20 .
3、Click
the right sign for USER MANUAL.
Connection scheme：
Figure 1：One
RJ11 interface marked
Phone
is for a normal phone,the other marked
PSTN
for landline
Figure 2：Connect
IPMate T-20 with PC or NOTEBOOK using one USB cable.
At the first time, when IPMate T-20 is connected
well with PC or NOTEBOOK through
USB cable,the OS will setup the driver for the
IPMate T-20 automatically.
Preparation for dialing:
1. Run the program of T-20
At the same time ,Skype voice communication software
will login automatically.
   shows
that the Internet connection is OK!
shows
that the Internet
connection is wrong.Pls check it.
2. To make sure there is a sign like in the bottom
of the Skype voice
communication software.
How to make a call
■
Use IPMate T-20 to make a Skype call
Before Using the normal phone connected with IPMate
T-20 to make a Skype call,
you should assign speed-dial number for contacts
firstly. please do as the followings：
1.
Right click some contact and then select "Assign
speed-dial",
showed as:
2. Enter the speed-dial key, the range is from 00 to
99.For example:
Click
OK
buttom to save setting.
Note:the
special service numbers in different countries are
prohibited to be set
into the speed-dial keys.
3. Pick up the handset of the normal phone connected
with IPMate T-20, press "*"
, and
the speed-dial number set in advance ,then "#", the
call begins to connect.
■
Use IPMate T-20 to make a PSTN call
Because the IPMate T-20 may connect with a
landline,so you can use the normal
phone connected with T-20 to make a PSTN number or
mobile phone.The steps are :
1. Pick up the handset of the normall phone
connected with T-20;
2. Dial the number you want to make a call with ;
6
How to receive call
When somebody calls your Skype or PSTN number,the
normal phone connected
with T-20 will ring.Pick up the handset or press the
Handfree to receive the incoming
call.When the call is over,pls put down the handset
or press the Handfree again.
How to forward Skype call to PSTN:
Before leaving your PC or NOTEBOOK for some
reason,you can make the forwarding
function work.then when somebody call you through
Skype,IPMate T-20 will automatically
forward the Skype call to the destination number set
in advance.So,you would not miss
any Skype call.
Note:The
PSTN line or landline connected well with T-20
is the premise for forward .And
your SKYPE is online.
1. Right click ,then showed as:
2. Left click
“INPUT
TRANSFER-PSTN NUMBER”,then
showed as:
3. Input the destination number (at most 22
figures),then click to save the
7
settings.
4.Left click to make
“CALL
TRANSFER-PSTN”work,showed
as
5. Make
“play
sound when somebody is calling me”
inefficient:
8
NOTE:when
you cancel the forwarding function ,pls make
efficient
Cautions:
1. Do not frequently change the IPMate`s USB cable
connection, a 30-second interval or
above is suggested.
2. Do not exit the IPMate software running in the PC
connected with Internet, otherwise,
you will not be able to make IP phone calls.
3. IPMate is precise electrical equipment. Please
carry it with care, and do not expose
under the sunshine directly, do not immersed in
liquid, do not set in moist environment, do
not set in too cold or too hot environment. Refer to
following Specifications.
|
